|
| |
Cables
|
|
|
PI-2005 Pattern Generator Cables
| 88001040-1 |
Clock Signal Interconnect Cable. This cable is used to connect the timing signals
from the Clock Card to the timing input of the Pattern Card. Cable is 12”
long with CONEC 3W3 mass termination connector on each end.
Each pattern card requires one cable (included with card).
|
| 88001030-8 |
Pattern
Card Output Cable. A
four-channel cable used to connect pattern card outputs to destination. The cable is a Micro-D connector to 4 BNC connectors.
Cable is 8’ in length.
|
| 88001035-2 |
Pattern
Card Output Cable. A
four-channel cable used to connect pattern card outputs to destination. The cable is a Micro-D connector to 4
SMA connectors.
Cable is 2’ in length.
|
| 88001035-8 |
Pattern
Card Output Cable. A
four-channel cable used to connect pattern card outputs to destination. The cable is a Micro-D connector to 4
SMA connectors.
Cable is 8’ in length.
|
| 88001060-6 |
Pattern Card Output Cable.
An eight-channel cable used to connect pattern card
outputs to destination. Cable
is two Mini-D connectors to one CONEC
8W8
mass termination. Cable is
6’ in length. P/N
88001060-8 is 8’ long.
|
| 88001065-72 |
Pattern Card Auxiliary I/O cable. Provides external clock in, system clock
out, and external start/stop via BNC connectors, and I2C clock
and data via a 9-pin D connector.
|
|
Clock Driver and DC Bias Cables
| 88001035-1 |
Pattern Card to Clock Driver. This cable is used to connect the
PI-2005 Pattern
Generator
outputs to the inputs of a CompactPCI Clock Driver Card when both cards are within
the same chassis. Cable has
four channels; Mini-D to SMA’s, length is 12”.
|
| 88001035-6 |
Pattern Card output. This cable is used to connect the
PI-2005 Pattern
Generator
outputs to the inputs of a CompactPCI Clock Driver Card when both cards are
in different chassis, or to an external destination with SMA connectors. Cable has
four channels; Mini-D to SMA’s, length is 6'.
|
| 88000010-5 |
Bias/Driver Output Cable. Single SMA to SMA coax cable 5’
long. Connects the output of a CompactPCI Bias or Clock Driver
channel to an SMA input. Also used for outputs from 42460.
|
| 88000104-5 |
Bias/Driver Output Cable. Single SMA to BNC coax cable 5’
long. Connects the output of a CompactPCI Bias or Clock Driver
channel to a BNC input. Also used for outputs from 42460.
|
| 88000071-6 |
Bias/Driver Output Cable.
Single BNC to BNC coax cable 6’ long.
Used to connect the output of a 4000 Series Bias or Clock Driver channel to
destination (except 42460).
|
|
Interface and Miscellaneous Cables
| 88000040 |
IEEE-488 Interface Cable, 6'.
|
| 40090-A-x |
PI-Bus Interface Cable. Connects the PI-31001 Interface Card to one or
more 4002 Instrument Mainframes. Specify "x" to indicate the
number of 4002 mainframes to be connected, minus one.
|
| 40093 |
DC Power Cable. Connects the 4003 DC Power Mainframe to the 4002
Instrument Mainframe. Each 4002 requires one cable.
|
|
|
