PI-41401 Specifications
|
|
|
DC Characteristics
| Output: |
|
|
1 MΩ Load
|
50 Ω Load
|
|
Hi-Level:
|
-5.0
V
to +8.0 V
|
-2.5
V
to +4.0 V
|
| Lo-Level: |
-5.0
V
to +8.0 V |
-2.5
V
to +4.0 V |
| Amplitude: |
0 V min to 9 V max. |
0 V min to 4.5 V max. |
| Resolution: |
64 mV |
32 mV |
| Accuracy: |
Transition times set to
minimum. Constant
Value may increase with increased transition times. |
3V
to +8V Range:
(HL-LL>1V)
|
1%
of prog.Value
± 150 mV |
1.5%
of prog. Value
± 75 mV |
-5V
to -3V Range:
(HL-LL>1V)
|
2.5%
of prog.Value
± 200 mV |
2.5%
of prog. Value
± 100 mV |
| Zero
to <1V Levels: |
|
|
| -3V to +8V
Range: |
3%
of prog. Value
± 200 mV |
|
| -5V to -3V
Range: |
6%
of prog. Value
± 300 mV |
|
|
|
Hi
and Low level can have the same value. Low-level cannot be programmed more positive than Hi-level and
Hi-level cannot be more negative than Low-level.
|
AC Characteristics
AC
Characteristics:
|
| Output: |
|
3 Vp-p into 50 Ω |
5 Vp-p into 50 Ω |
| Min. Pulse Width: |
3.4 ns, typ. |
5.0 ns, typ. |
| Rise/Fall Time: |
<2 ns |
<3 ns |
| Max. Rep. Rate: |
140 MHz |
100 MHz |
| Rise/Fall Time Range: |
minimum to 5x
minimum |
| Aberration: |
<5% of Amp ±100 mV
|
| Polarity: |
Normal or Inverted |
Normal or Inverted |
| Propagation Time: |
7 ns maximum
- TTL input to main output |
| Inputs: |
|
| TTL |
max LL= 0.7 V
min HL = 2.2 V
TTL input resistance programmable 50 Ω or 1 kΩ ±10%.
ECL single ended, 50 Ω input resistance,
referenced to –2 V. |
| Signal Connectors: |
SMA
for all inputs and outputs. |
| External ±12V: |
9
pin Micro D |
|
| Resistance: |
50 Ω ±3% (Backmatch Value)
|
| Leakage: |
7µA
(Tri-state operation) |
| Short
Circuit: |
-5V to +8V, (shorting
the output to a voltage outside the specified range may damage the
output driver.) |
| V/I Sense: |
|
| Voltage: |
0.5% of reading ± 20 mV |
|
Current:
|
|
|
1mA Range:
|
1% of reading ±20µA
|
|
10mA Range:
|
1% of reading ±200µA
|
|
20ma Range:
|
1% of reading ±300µA
|
|
Internal A/D:
|
|
|
Range:
|
± 1V to ± 8V
|
|
Accuracy:
|
2% of reading ±50mV
|
|
| Power Consumption: |
|
| Pwr.
Supply |
Min |
Typical |
Max. |
| 5.0 V ± 5% |
- |
TBD |
- |
| 3.3 V ± 5% |
- |
TBD |
- |
| 12 V ± 5% |
- |
TBD |
- |
| -12 V ± 5% |
- |
TBD |
- |
| Mechanical: |
- Size 6U Eurocard
- Dimensions 6.30" x 9.18" (160.00mm
x 233.35mm)
- One card slot
-
Signal
Out Mating Plug Connector CONEC 3-003W3-P-C-X-41-A1-0X
-
External
Drive In Mating Plug Connector CONEC 3-013W3-P-C-X-41-A1-0X
|
|
|
