PI-41110 4:1 Digital Multiplexer Card

Data Acquisition > PI-41100  

Features:

• 100 MHz maximum total data rate
• 4:1, 3:1 or 2:1 multiplexing
• Can also operate as a 1:1 scanner/switch
• 16 bits/channel plus 3 clock signals
• LVDS outputs will drive long cables 

Applications:

• Part of PI-3105 Data Acquisition System
• Capture multiple outputs from imaging devices
• Synchronous data capture
• Scanner/Switch

Introduction:

The PI-41110 is a 4:1 digital multiplexer card in a CompactPCI® form factor.

It is primarily designed as a part of the PI-3105 Data Acquisition System, but can also be used in any application requiring the multiplexing of digital data streams.

The card can be configured in software to multiplex 4:1, 3:1 or 2:1, or as a 1:1 scanner/switch.

The PI-41110 reads each of the selected input channels in turn, and outputs the interleaved data at 100 MHz. The output rate is controlled by an internal crystal clock.

Clocking of the data is typically provided by a separate pixel clock to demarcate valid data words. Additional timing signals, such as frame sync and line sync, can be used to demarcate video lines and video frames of data.

The LVDS inputs of the PI-41110 are typically fed into the inputs of a digital acquisition card, such as the PI-41000.

The PI-41110 is supported by Pulse Instruments’ PI-DATS and PI-Controller software. 

Ordering Information:

Contact Pulse Instruments Sales at (310) 515-5330 or by email at sales@pulseinstruments.com

Specifications